Safety Warnings For Battery Cells Inside The Tool
e) In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area with
copious amounts of water and seek
medical advice.
f) Seek medical advice immediately if a cell
has been swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean
dry cloth if they become dirty.
i) Power tool needs to be charged before
use. Always refer to this instruction and
use the correct charging procedure.
j) Do not maintain power tool on charge
when not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge
the power tool several times to obtain
maximum performance.
l) Battery gives its best performance
when it is operated at normal room
temperature (20 °C ± 5 °C).
m)When disposing of cells, keep cells
Safety Information
Important - Please read these instructions fully before starting assembly
To Next Page
Loading...
