Customer Helpline 0333 3201989
13
Technical Data
Voltage 220-240V~50Hz
Power consumption 350 W
Nozzle size 2.5 mm
Max air volume flow 500 ml/min
Max viscosity 50 DIN-s
Tank capacity 800 ml
Spraying pressure 0.1-0.2 bar
Protection degree
/II
Weight 0.99 kg
Technical Data Table
A weighted sound pressure L
pA
:80dB(A)
A weighted sound power L
wA
: 90dB(A)
K
pA
& K
wA
=3.0dB(A)
Wear ear protection 80dB(A)
Noise Information
Vibration total values (triax vector sum) determined according to EN 60745&& EN 50580:
Vibration emission value a
h
= 7.39m/s
2
Uncertainty K = 1.5m/s²
Vibration Information
WARNING: The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions
of use should also take account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle but not actually doing the job.
This may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
To Next Page
Loading...
