Section 3
3-9
3.5.2.
Menu Option - <any other menu but measure>
In all other menu options if a function key has a defined set of alternate values, pressing that
function key will cause one of the alternate values to be selected and displayed in the
associated active area of the display screen.
Example: Current Screen
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Mode: RS W: ▒
▒Display: Ratio RS SN: ▒
▒Update: Update 1 RX W: ▒
▒Filter: RRate: ▒
▒Power: Ratio: ▒
▒ ▒
▒══════════┬──────────┬─────────┬──────────▒
▒Mode │Display │Update │MORE 1-2 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Example continued: Screen after pressing function key <Display>
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Mode: RS W: ▒
▒Display: Ohms RS SN: ▒
▒Update: Update 1 RX W: ▒
▒Filter: RRate: ▒
▒Power: Ratio: ▒
▒ ▒
▒══════════┬──────────┬─────────┬──────────▒
▒Mode │Display │Update │MORE 1-2 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
The alternate value "Ohms", associated with the function key <Display>, is toggled
into the active screen area to replace the previous value "Ratio".
NOTE:
When a function key box is drawn with two lines in the display window pressing
that function key will select a set of lower level menu options. In the previous
example, the function key <Mode> will move to a second lower level in the
menu system.
To Next Page
Loading...