Section 3
3-10
3.5.3. Base Edit/Select Menu - one column of data
An optional header line can appear at the top of a screen display to prompt or inform the user
with "details" of the present menu level. If a header line is displayed the number of
selections are restricted to 6 or less. If there is no header line then the number of selections
can be 7 or less.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Header Line ▒
▒Select/Data 0 ▒
▒Select/Data 1 ▒
▒Select/Data 2 ▒
▒Select/Data 3 ▒
▒Select/Data 4 ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Select │Ok │ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
3.5.4. Base Edit/Select Menu - two columns of data
If there is a header line then the number of selections is displayed is limited to a maximum of
10. Without the header line up to 12 selections can be displayed.
(Header line is optional.)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Header Line ▒
▒Select/Data 0 Select/Data 5 ▒
▒Select/Data 1 Select/Data 6 ▒
▒Select/Data 2 Select/Data 7 ▒
▒Select/Data 3 Select/Data 8 ▒
▒Select/Data 4 Select/Data 9 ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Select │Ok │ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
3.5.5. Operation of Select/Edit Data Menus
3.5.5.1. Function - <Screen ?>
If more than one screen of display information is available for selection as current at
a menu level, then a <Screen ?> software function key will appear above the fourth
function key <Fn-4>. The numeric "?" represents the total number of screens
available for view. Pressing the <Screen ?> function key will cause the display to
move to the next sequential screen. Pressing the key on the last screen will cause the
display to move back to the first screen.
To Next Page
Loading...