Section 3
3-20
3.7.2.1.3.<Load> MENU Fn-1 (Probes_Setup_MAIN)
Allows selection of temperature probe files.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Probes File : ?? ▒
▒00 SN of Probe______ ▒
▒01 ▒
▒02 ▒
▒03 ▒
▒04 ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Select │Ok │ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
The header line displays the number ?? (00-04), of the selected/active probe
file.
3.7.2.2. <Edit> Resistors MENU Fn-2
3.7.2.2.1. <Edit> Resistors MENU Fn-2 (Resistors_Setup_MAIN)
Edit resistors menu page 1 of 2.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Mode: RS : ▒
▒Display: <Fn-2> RS SN: ▒
▒Update: <Fn-3> RX : ▒
▒Filter: RRate: ▒
▒Power: Ratio: ▒
▒ ▒
▒══════════┬──────────┬─────────┬──────────▒
▒Mode │Display │Update │MORE 1-2 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Ohms Update 1
Ratio Update 2
Update 4
Function key <Fn-1> ,<Mode>, allows selection of the mode of operation of the
6675A from the <Mode> sub-menu.
Function Key <Fn-2> ,<Display>, allows selection of the units displayed on the
screen either Ohms or Ratio (no units).
To Next Page
Loading...