Section 3
3-39
RS232 Sofcal menu selection page 2 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒RS232 Setup ▒
▒Baud: Flow Cont(rol):<Fn-3>▒
▒Parity: Mode: ▒
▒Stop Bits: ▒
▒Data Bits: <Fn-1> ▒
▒Echo: <Fn-2> ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Data Bits │Echo │Flow Cont│MORE 2-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function key <Fn-1>, <Data Bits> selects data size in bits from: <8>, <7>.
Function key <Fn-2>, <Echo> turns echo <On> or <Off>.
Function key <Fn-3>, <Flow Cont> turns data flow control <On> or <Off>.
RS232 Sofcal menu selection page 3 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒RS232 Setup ▒
▒Baud: Flow Control: ▒
▒Parity: Mode: <Fn-1> ▒
▒Stop Bits: ▒
▒Data Bits: ▒
▒Echo: ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Mode │Ok │ │MORE 3-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function Key <Fn-1>, <Mode> selects mode of communication from:
<Talk/Listen>, <Talk Only>, <Disable>.
Function Key <Fn-2>, <Ok> accepts all the information that has changed, saves the
changes to memory, and resets RS232 interface. If <Ok> is not pressed then all
changes are ignored and the previous settings are reloaded.
NOTE:
If GPIB is in the Talk/Listen mode then the <Mode> key will never display the
Talk/Listen mode option since only one remote controller can be active with the
6675A at a time.
To Next Page
Loading...