Section 3
3-38
No GPIB settings will be saved or acted upon until <FN-3> the <Ok>. key has been
pressed.
NOTE:
If RS232 is in the Talk/Listen mode then the <Mode> key will never display the
Talk/Listen mode option since only one remote controller can be active with the
6675A at a time.
3.7.4.2. <RS232> MENU Fn-2 (Sofcal_MAIN)
RS232 Sofcal menu selection page 1 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒RS232 Setup ▒
▒Baud: <Fn-1> Flow Control: ▒
▒Parity: <Fn-2> Mode: ▒
▒Stop Bits: <Fn-3> ▒
▒Data Bits: ▒
▒Echo: ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Baud │Parity │Stop │MORE 1-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function key, <Fn-1>, <Baud> selects data rate from: <9600>, <4800>, <2400>,
<1200>.
Function key, <Fn-2>, <Parity> selects parity from: <Even>, <None>, <Odd>.
Function key, <Fn-3>, <Stop> selects number of stop bits from: <1>, <2>.
To Next Page
Loading...