Section 3
3-37
Function Key <Fn-2> ,<Selftest>, displays the result of the power on self test and the
revision level of the installed software.
Function Key <Fn-3> ,<Chart>, allows setting of the chart recorder/analog output range
value.
Sofcal menu selection menu page 3 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒══════════╤══════════╤═════════╤──────────▒
▒Filter │Datum │PASSWORD │MORE 3-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function Key <Fn-1> ,<Filter>, allows setting of the filter constants for the AVERAGE and
DECIMATION filters.
Function Key <Fn-2> ,<Datum>, allows setting of reference/datum values for measurement
display changes.
Function Key <Fn-3> ,<PASSWORD>, allows setting of the unit password feature.
3.7.4.1. <GPIB> MENU Fn-1 (Sofcal_MAIN)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Gpib Setup ▒
▒Address: <Fn-1> ▒
▒Mode: <Fn-2> ▒
▒ ▒
▒ ▒
▒ ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Address │ Mode │Ok │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
<Address> function key Fn-1 sets the GPIB address.
<Mode> function key Fn-2 selects from the options <Talk/Listen>, <Talk Only>,
<Disabled>.
To Next Page
Loading...