Section 3
3-36
3.7.4. <Sofcal> MENU Fn-4 (MAIN)
The menu options available through this function allow configuration setup and general
modes of operation of the 6675A. Three pages of menu options are available for this Sofcal
selection.
Sofcal menu page 1 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒══════════╤══════════╤═════════┬──────────▒
▒GPIB │RS232 │Voltmeter│MORE 1-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function Key <Fn-1> ,<GPIB>, allows selection of the device GPIB parameters including
address and mode.
Function Key <Fn-2> ,<RS232>, allows selection of the RS232 serial communication
parameters including baud rate, number of start/stop/parity bits etc.
Function Key <Fn-3> ,<Voltmeter>, allows selection of the function to set the calibration
coefficients for the 6675A when used as a voltmeter with nanovolt resolution.
Sofcal menu selection menu page 2 of 3.
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒ ▒
▒══════════╤══════════╤═════════┬──────────▒
▒Diagnostic│Selftest │Chart │MORE 2-3 ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function Key <Fn-1> ,<Diagnostic>, allows selection of functions that control the hardware.
This function is useful when diagnosing problems with the 6675A.
To Next Page
Loading...