Guildline 6675A - Page 64

Section 3
3-47
3.7.4.7. <Filter> MENU Fn-1 (Sofcal_MAIN)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Filters ▒
▒Average N:___ ▒
▒Decimation:___ ▒
▒ ▒
▒ ▒
▒ ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Average N │Decimation│ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
Function key Fn-1 <Average N> allows the number of data samples to be set for the
simple averaging filter <1, 2, 4, 8, 16, 32, 64, 128>.
Function key Fn-2 <Decimation> allows the setting of the decimation filter factor
<1% through 50%>.
3.7.4.8. <Datum> MENU Fn-2 (Sofcal_MAIN)
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
▒Celsius: ▒
▒Fahrenheit: ▒
▒Kelvin: ▒
▒Ratio: ▒
▒Ohms: ▒
▒ ▒
▒──────────┬──────────┬─────────┬──────────▒
▒Edit │ Ok │ │ ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒
The values displayed in this menu are used as datum values when the 6675A is
measuring ratio, resistance, temperature, or voltage.
The datum function is applied only to two menu functions from the <MAIN> menu,
they are the <Measure> menu and the <Voltmeter> menu.