8
OPERATING INSTRUCTIONS
f. Plug the free end of the extension air tube to the air
outlet located on the footrest by pushing it into the
opening until snug – Do not push the tube in too far.
g. Open the mixer handle to fill the bowl with water to
the desired level.
h. Press and release the “J” button once to start
the system.
i. To stop the system, press and release
the “J” button again.
NOTE: For WaterDance Bubbler System with optional automatic
timer of 30 minutes:
- Pressing and releasing the “J” button will start the system
- After 30 minutes, the system will shut off automatically
- To run the system for another 30-minute cycle, simply
press and release the “J” button again – the system can
be restarted as many times as necessary to complete the
pedicure session.
- During the 30-minute cycle, the system can be turned off
at any time by pressing and releasing the “J” button.
2. After the pedicure session:
a. Tear or punch the liner at the drain opening to drain
out water.
b. Unplug the extension air tube from the air outlet on the
footrest by pulling the tube straight out.
c. Once water has been drained, the AirPad and
the liner can be disposed in accordance
with local requirements.
To Next Page
Loading...
