To Next PageTo Next Page
Need help?Do you have a question about the Gullberg & Jansson X15 and is the answer not in the manual?
Overview of the pool heat pump models, their design, and key features.
Explanation of how the pool heat pumps operate for heating and cooling, including efficiency factors.
Lists the main unit components and included installation accessories.
Contains vital details regarding transport, storage, and general operational advice.
General guidance on outdoor installation requirements and noise considerations.
Basic notes on setting parameters and general usage.
Advice on winter draining, cleaning, and regular checks.
Guidance on contacting installers and mentioning serial numbers for service.
Information on unit repair, spare parts, and solar panel compatibility.
A step-by-step checklist for a correct pool heat pump installation.
Details on warranty validity, repairs, and spare parts.
Essential safety instructions for handling, installing, and using the pool heat pump.
Shows the typical connection layout of the heat pump with pool components.
Guidelines for optimal placement of the unit for airflow and efficiency.
Instructions for placing the unit on a firm base and ensuring proper drainage.
Recommendation for connecting the heat pump to the pool's purification system.
Information on condensation formation and proper drainage management.
Details on connecting the unit to the pool's circulation system using union couplings.
Recommendation for fitting a bypass for flow adjustment and servicing.
Instructions for electrical connection, safety switch, and phase sequence.
Step-by-step procedure for the initial start-up of the pool heat pump.
Guide for connecting and setting up the WiFi module for remote monitoring.
Explanation of the heat pump's LED display and button functions.
How to start and stop the pool heat pump using the On/Off button.
Instructions on adjusting the desired pool water temperature via the control panel.
How to view the outgoing water temperature on the display.
Guide to switching between heating, cooling, and auto operating modes.
Accessing and modifying advanced settings like timer and defrost functions.
A table listing all configurable parameters with their ranges and default values.
A table detailing sensor parameters and their status or values.
Critical procedure for draining the unit before winter to prevent frost damage.
Routine tasks for cleaning filters, ensuring ventilation, and general upkeep.
Guidance on initial troubleshooting steps and contacting dealers.
A chart linking operating disturbances to their causes and suggested actions.
A table detailing error messages, their causes, and recommended corrective actions.
Details the designations and functions of connections on the PC1002 controller.
Electrical schematic for the V15 model, showing component connections.
Electrical schematic for the V20 and V30 models, detailing component connections.
Electrical schematic for the V30-3P model, illustrating component connections.
Electrical schematic for the V40 and V60 models, showing component connections.
Electrical schematic for the V40-3P and V60-3P models, detailing connections.
A table containing key technical data, performance metrics, and dimensions for all models.
A diagram and table showing the physical dimensions and connection points for various models.
General| Brand | Gullberg & Jansson |
|---|---|
| Model | X15 |
| Category | Heat Pump |
| Language | English |
