To Next PageTo Next Page
Need help?Do you have a question about the Gullberg Jansson GJPACW1V-15 and is the answer not in the manual?
General| Brand | Gullberg Jansson |
|---|---|
| Model | GJPACW1V-15 |
| Category | Swimming Pool Pump |
| Language | English |
Overview of air/water heat pumps for swimming pools and spa pools.
Explains how the heat pump works and its operational requirements.
Key points on transport, storage, installation, usage, maintenance, and fault tracing.
Guidelines for safe transport and storage to prevent damage.
Requirements for outdoor installation, firm placement, drainage, and air circulation.
Information on factory settings and general operation of the unit.
Essential steps for winter draining and regular checks to ensure performance.
Guidance on contacting installation engineers for faults and stating product numbers.
Notes on repairs, spare parts, and combining with solar collectors.
A checklist to ensure all steps for proper heat pump installation are followed.
Conditions for system transport, storage, installation, and usage for valid guarantee.
Crucial safety instructions for handling, installing, and using the heat pump.
Visual representation of the heat pump's connection to the pool system.
Ideal conditions and placement guidelines for optimal heat pump performance.
Requirements for firm base, noise consideration, drainage, and air circulation for setup.
Discusses pipe routing, insulation, and heat loss impact on running time.
Explains condensation formation and the importance of proper drainage.
Details on connecting the heat pump to the pool circulation system using union couplings.
Recommends bypass fitting for flow adjustment and service, with adjustment steps.
Instructions for electrical connection, including safety switches and earth connection.
Step-by-step procedure for the initial start-up of the heat pump.
Explains the meaning of the LED display and various buttons for unit control.
Step-by-step guide on how to adjust the heat pump's operating parameters.
Instructions on switching between heating and cooling modes.
Details on interpreting various sensor readings displayed by the unit.
Procedure for setting the current time on the heat pump's display.
How to set timers for automatic start and shutdown of the heat pump.
Steps to disable or deactivate the set timers.
Crucial steps for winter draining to prevent freezing damage and maintain guarantee.
Regular cleaning of filters, checking ventilation, and heat exchanger cleaning for optimal function.
Lists error messages, their causes, and recommended actions for troubleshooting.
A table detailing common operating disturbances, their causes, and corrective actions.
Details the designation and description of each terminal connection for the Chiller 300.2.
Provides the wiring diagram for one-phase and three-phase connections of the heat pump.
Illustrates and lists the placement of various components within the GJPACW1V heat pump.
Presents detailed technical specifications for GJPACW1V models.
Provides dimensional drawings and connection details for GJPACW1V models.
Illustrates and lists the placement of various components within the GJPACW1 heat pump.
Presents detailed technical specifications for GJPACW1 models.
Provides dimensional drawings and connection details for GJPACW1 models.
Addresses common user questions regarding temperature setting, performance, and maintenance.
