Need help?Do you have a question about the Gunnebo DL645 and is the answer not in the manual?
Provides foundational information for using the manual.
Details critical safety precautions regarding electrical hazards during operation and maintenance.
Instructions for reporting errors, comments, and suggestions.
Information on data ownership and usage restrictions.
Guidelines for authorized hardware modifications and reporting requirements.
Covers conditions of use, rotating machinery, warnings, static sensitive devices, and good practices.
Explains safety systems, guards, and risk assessment grading for various activities.
Continues risk assessment details for activities and covers CE marking.
Provides a critical notice regarding supervision of minors using the turnstile.
Introduces the Hercules-Lite Tripod range and its design for high flow and security.
Displays diagrams of the DL645 turnstile.
Displays diagrams for the Simplex 45 and Simplex 45 ATT turnstiles.
Guidelines for personnel on correct turnstile operation, including access control readers and push buttons.
Lists crucial 'DO NOT' instructions for safe operation, including handling bags and obstructions.
Explains the conventional signs used in the manual and the schematic diagram.
Details the bi-directional operating modes (Unlock, Lock, Reader control) and configuration options.
Explains the "Normally Closed" and "Normally Open" transit sequences.
Describes the transit sequences for Normally Closed/Open and the Emergency/Fire Alarm input.
Explains the use and configuration of optional traffic lights and pictograms.
Covers various alarm conditions, their causes, and reset procedures.
Details the electrical interface for remote control and RS485 serial line communication.
Explains how trimmers on the LL2001 board affect operational modes and timings.
Describes how the system manages authorization signals from card readers.
Lists available electrical outputs and their logic functions for interfacing.
Covers unpacking, required tools, site preparation, and environmental conditions.
Details power supply characteristics, general conditions, and cabling requirements.
Covers mounting details, unit positioning, and electrical connections.
Details power supply, connection with readers, and MP2000 remote control unit connection.
Covers emergency/fire alarm input and RS485 serial line connections.
Covers general care, routine maintenance, monthly checks, and annual checks.
Provides guidance on troubleshooting, fault finding procedures.
Details the procedure for replacing the LL2001 control board.
Information on available spare parts for the turnstile.
Details the configuration for Trimmer TR1 (Solenoids).
Details configurations for Trimmer TR2 (Reader management) and TR3 (Timings).
Details configurations for Trimmer TR4 (Authorizations stacking, Counting pulse sequence) and TR5 (REL2, REL3, Traffic Lights).
Details configurations for Trimmer TR6 (IN-AUX, OUT-AUX) and TR7 (Mode A and B, Remote Controls).
Details configurations for Trimmer TR8 (REL1) and LL2001 dip-switches for RS485 address assignment.
General| Brand | Gunnebo |
|---|---|
| Model | DL645 |
| Category | Turnstiles |
| Language | English |
To Next Page
