GUSMER H-20/35 User Manual

"Success through Unity"
H-
20/35 VR Series
Proportioning
Unit
Operating Manual
42942-VR-1
December 19, 2002
Issue 1
GUSMER CORPORATION
®
A Subsidiary of Gusmer Machinery Group, Inc.
One Gusmer Drive
Lakewood, New Jersey, USA 08701-8055
Toll Free 1-800-367-4767 (USA & Canada)
Phone: (732) 370-9000
Fax: (732) 905-8968
Copyright 2002, GUSMER CORPORATION
®
http://www.gusmer.com
NOTICE: This manual contains important information about your GUSMER equipment. Read and retain for future reference.

GUSMER H-20/35 Specifications

General

Brand	GUSMER
Model	H-20/35
Category	Paint Sprayer
Language	English

Summary

WARRANTY

GENERAL SAFETY INFORMATION

Acceptable Equipment Uses

Defines intended applications for the equipment.

Operational Safety Procedures

DESCRIPTION

SPECIFICATIONS

INITIAL MACHINE SET-UP

RATIO ADJUSTMENT

OPERATION

Daily Start-up Procedures

Steps for normal daily start-up of the equipment.

Daily Shut-down Procedures

Steps for safely shutting down the equipment daily.

TROUBLESHOOTING

General Information

Provides an overview of troubleshooting common problems.

Hose Heat System

Troubleshooting specific issues related to the hose heat system.

Primary Heaters

Troubleshooting common problems with primary heaters.

Proportioning System

Troubleshooting issues within the proportioning system.

Hydraulic Drive System

Troubleshooting problems with the hydraulic drive system.

MAINTENANCE

Primary Heaters

Maintenance procedures for the primary heating components.

Thermocouple Replacement

Pump Bases

Inlet Strainer Screen

Pump Lube System

Hydraulic Drive System

APPENDIX