GUSTARD C16 - Main Functions and Operations

-
4
-
Main functions and operations
1. Intelligent heat engine function:
When the power tailstock switch at the rear of the fuselage is turned on, the C16
enters the warm-up state, and the panel indicators flash at the same time.
2. Automatically turn on the clock output when the machine is finished
When the machine is warmed up for about 15 minutes, the panel indicators are
turned on at the same time, and the VIVID group and the GENTLE group are
automatically and simultaneously Turn on output
3. Key Function:
When the heat engine is finished:
VIVID is used to enable or disable the VIVID output group. Press the VIVID key,
the corresponding indicator is bright to turn on the output, Dim is to turn off
the output.
GENTLE is used to enable or disable the GENTLE output group. Press the GENTLE key,
the corresponding indicator light is bright to turn on the output, Dim is to turn
off the output.
15 minutes warm-up time:
VIVID is used to control the opening and closing of the VIVID output group. Press
the VIVID key, the corresponding indicator is always on to turn on the output.
Blinking turns off the output.
GENTLE is used to control the opening and closing of the GENTLE output group.
Press the GENTLE key, the corresponding indicator light is always on to turn on
the output. Blinking turns off the output.