EN
18
15 operating hours, the red LED on the
roof unit begins to light up – then please
clean the filter. Metal filters are best
cleaned in the dishwasher using a gen-
tle detergent. The manufacturer does
not assume any guarantee whatsoever
for any discolouration caused by the use
of aggressive cleaning agents.
Temperatures exceeding 55 degrees
must also be avoided.
Switch off the extractor hood and pull
out the mains plug or switch off the
electricity supply at the fuse box.
Replace faulty lights through new ones
immediately.
Please cut the connection between the
extractor hood and the power supply
system!
The lightings remain hot for some time.
Please wait therefore for some time till
the lightings have cooled off.
After cooling-off the glass cover is to be
removed with a small screwdriver. Then
the lighting can be taken out. Please
avoid any skin contact with the luminous
means. After the exchange press the
glass pane lightly to a certain extent
(lock in of the pane).
Restore the power by inserting the
mains plug or switching on the fuse.
Note: If the light does not function,
check that the bulbs have been inserted
correctly.
Carbon, C-Version
Expansion: page: 56
Maintenance: separate instructions
Carbon.
To Next Page
Loading...
Need help?
General
