Why is communication to the vehicle not established on my GUTMANN mega macs 56 Bike Other?
If communication to the vehicle cannot be established, ensure the correct vehicle is selected by engine code. Adhere strictly to the information and instructions provided. Verify that a 12V voltage supply is ensured via the vehicle at pin 16 of the DT VCI. You may also need to perform a DT VCI plug test.
What to do if my GUTMANN mega macs 56 Bike device does not print?
If the device does not print, first switch on the printer and ensure that it is online. Check the paper feed and adjust the paper feed mode. Review the printer configuration and ensure the printer cable is correctly connected. You can also try exchanging the printer cable or selecting another printer for testing purposes.
What to do if the GUTMANN Other program hangs up?
If the program hangs up or is without function, briefly interrupt the voltage supply. You can also try restarting the device. Check the present software for incorrect or missing files and perform a software update.
Why does my GUTMANN Other oscilloscope indicate wrong values?
If the oscilloscope indicates wrong values, make sure to correctly plug the test lead into the MT 56. Remove all cables except the test lead, and correctly attach the test lead to the affected components of the vehicle. You can also replace the test lead for testing purposes and connect the measuring channel (-) to the vehicle ground.
How to fix a GUTMANN Other device that does not boot?
If the device does not boot, check the connections of the power adapter and cable to the device and plug socket. Also, ensure voltage supply.
To Next Page
General