en
16
Exchange of the lighting
Standard model with LED lighting !
Defective luminaires must be replaced
without delay. Before exchanging the
luminaires, power down the extractor
hood!
Caution: bulbs must only be replaced
by a service technician.
Faults
Please contact our service department
immediately, if:
- If the extractor hood creates unusual
noises and you are unable to detect any
faults after checking the extraction air
line
- If you discover, for example, by hear-
ing strange noises, that the motor is
faulty or defective
- the switches are not working properly.
Please remember to indicate your ex-
tractor hood model and the correspond-
ing serial number. This information can
be found on the type plate. This plate is
located inside the hood near the filters.
Technical data
Connection mains:
230 V / 50 Hz, max. 270 Watt
Lighting: LED 3,7 W
To Next Page
Loading...
