What to do if my GVision I32ZI-OD-45P0 picture does not appear?
If the picture on your GVision Touchscreen does not appear, ensure that all I/O and power cables are firmly seated in their sockets. Also, check that the power LED is lit when the monitor is turned on and verify the brightness control is appropriately adjusted, not set to the minimum.
Why is my GVision I32ZI-OD-45P0 shaking or waving?
If your GVision Touchscreen is shaking or waving, try the following: 1. Use the auto adjustment control. 2. Move any objects emitting a magnetic field (like motors or transformers) away from the monitor. 3. Ensure the correct voltage is applied. 4. Verify that the computer system's signal timing is within the monitor's specifications.
What to do if my GVision I32ZI-OD-45P0 Touchscreen is too bright or dark?
If your GVision Touchscreen appears too bright or too dark, check the brightness and contrast controls to ensure they are set to an appropriate level.
How to fix a GVision Touchscreen when the screen is not synchronized?
To resolve a synchronization issue with your GVision Touchscreen, first, check that the I/O signal cable is firmly seated in the socket. Next, ensure that the output level matches the input level. Finally, confirm that the signal timings of your computer system are within the monitor's specifications.
How to center the screen on a GVision I32ZI-OD-45P0 Touchscreen?
To center the screen on your GVision Touchscreen, adjust the H-position and V-position settings. Alternatively, perform an auto adjustment or memory recall.
General| Brand | GVision |
|---|---|
| Model | I32ZI-OD-45P0 |
| Category | Touchscreen |
| Language | English |
To Next Page