GVS KNX K-BUS BTIS-04/00.1 - General

GVS K-BUS
○
R
KNX/EIB IR Emitter & IR Learner
5
www.video-star.com.cn marketing@video-star.com.cn Tel.：（8620）39338986
Fax：（8620）39338465
1. General
We call it “IR Learning” that combine the three parts, PC Software, IR Learner and IR Emitter.
The IR Learning can be used for learning control code of the IR Remote Controller, and storing the
code to the database in the PC software. The learned control code can be stored, deleted or tested in
the software.
The IR Emitter has BTIS-04/00.1 and BTIS-01/00.1. The BTIS-04/00.1 has 4 channels.
Usually, we use one channel to control one IR Remote Control device. The IR Learning can learn
up to 64 functional control codes for each channel. However, the BTIS-01/00.1 supports 360 degree
full direction transmitting, and support up to 256 IR codes control.
The IR Learning is consist of PC Software, IR Learner and IR Emitter.
The PC Software is used for config the functions, like physical address, group address, scense
call, etc.
IR Learner is connected to the PC via USB interface and used to learn the control codes of the
keys of the IR Remote Controller. The learning process is realized by operating the software, and
you should put the IR emitter on the remote control near to IR detector on the IR Learner as close as
you can to avoid the failure of learning.
The IR Emitter is connected to the EIB/KNX bus directly using the EIB bus connection
terminal. As the configuration has been finished, the PC software can download the learned control
code to the IR Emitter via the KNX downloader, which has been connected to the KNX/EIB bus.
After success to download, the IR Emitter can control the switch, wind speed and timing of a fan, as
well as the IR remote control devices, such as DVD, TV, Air-Condition, Fan, etc. through sending
telegrams on the KNX bus by other devices in the EIB/KNX system.
This manual provides detailed technical information about the IR Learning for users as well as
assembly and programming details, and explains how to use the IR Learning by the application
examples.
The functions of the IR Learning are summarized as follows:
 Supports the IR Emitter of BTIS-04/00.1 and BTIS-01/00.1 versions ;
 The device manager of IR can be configured with 20 IR Emitter devices at most ;
 The device manager of IR Learning code can be configured with 40 controlled appliances ;
 Each of the controlled appliance can learn 40 key encoding at most ;
 Each devices have 4 channels, and can configure 256 commands ; (maybe the
BTIS-01/00.1 can support more devices,but max. number of commands still are 256)