EasyManua.ls Logo

GWINNER FELINO User Manual

GWINNER FELINO
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1GENERAL FELINO INSTALLATION + FES
GENERAL INSTALLING & FES
FELINO
IMAGE 1, Example wall-element combinations FE3 and FE1
IMAGE 2, Fit anti-tilt guard!
A fixing bracket with metal pin is fitted
as anti-tilt guard to all 5R and 8R base
units to prevent them from tipping
forward. A 5x60 mm countersunk
screw and an 8 mm dia. plastic wall
plug are used. The 12 mm cover plate
only covers the fitting when mounted
at an angle.
+/-
Press levelling glides
into holes provided and
align units
4x17 roundhead
screw
5.5x70 cheese-head
screw
FROM RE5247
Qualied specialist personnel
PLEASE NOTE!
CAUTION! Follow the specications carefully when tting wall units. Secure all
elements that may tip with the anti-tip mechanisms supplied.
Wall plug,
dia. 8 mm
Question and Answer IconNeed help?

Do you have a question about the GWINNER FELINO and is the answer not in the manual?

GWINNER FELINO Specifications

General IconGeneral
BrandGWINNER
ModelFELINO
CategoryIndoor Furnishing
LanguageEnglish

Summary

Anti-Tilt Guard Installation

Anti-Tilt Guard Components

Details components like screws, wall plugs for anti-tilt guard.

Securing Wall Units

Instructions on fitting the anti-tilt mechanism to prevent tipping.

Unit Alignment and Cover Panel Installation

Connecting Units

Instructions for connecting units using specific screws and nuts.

Cover Panel Fitting

Details on securing 12mm cover panels from the inside.

Wall Panel Installation

Wall Plug Suitability

Specifies suitable wall plug use for various subsurface types.

Hanging Wall Units

Wall Unit Adjustment Screws

Explanation of upper and lower adjustment screws for depth and height.

Wall Unit Adjustment Caution

Cautionary note about checking fitting engagement in rails during adjustment.

Final Assembly Steps

Install Anti-Tilt Guard

Reference to Image 2 for anti-tilt guard installation.

Install Top Panel

Reference to Image 3 for top panel installation.

Wall Panel Dimensions and Drilling

Wall Plug Suitability for Panels

Specifies wall plug use for concrete, brick, and hollow blocks.

Hanging Wall Cabinets

Wall Unit Adjustment Details

Details on depth and height adjustment screws for wall units.

Wall Unit Adjustment Caution

Cautionary note to check fitting engagement in rails during wall unit adjustment.

FE1 Assembly

Install Upper Wall Panel

Reference to separate instructions for installing upper wall panel with shelf.

Connecting Wall Panels with Glass Shelf

Connecting Units with Screws and Nuts

Instructions on connecting panels using spindles, plates, and screws.

Fitting Connector Housing

Details on fitting connector housing with threaded stud to lower wall panel.

Drilling Holes for Wall Panels

Wall Plug Suitability for Drilling

Specifies wall plug use for various masonry types for wall hooks.

Hanging 19mm Wall Panels

Wall Panel Adjustment

Instructions on adjusting wall panels using hooks for proper engagement.

Handle Installation

Instructions for installing handles on drawers and glass doors.

Handle Installation

Installing Handles on Drawers

Details on screwing handles to drawers and top sections using plate screws.

Aligning Doors by Adjusting Hinges

Guide to adjusting hinges for vertical, horizontal alignment, and depth.

Drawer Height Adjustment

Instructions for precision height adjustment of drawers.

LED Lighting Safety

Cautionary note on connecting LED lights to safety transformers and load limits.

Drawer Unit Assembly

Installing Drawer Clips and Glasses

Steps for inserting clips and sliding glasses into drawer profiles.

Front Gap Adjustment

Method for adjusting front gap on glass doors using magnets and screwdrivers.

Wall Unit Height Grid (1.5 inch base)

Drilling and Installation Dimensions

Provides drilling and installation dimensions for various wall unit configurations.

Wall Unit Height Grid (2.3 inch base)

Drilling and Installation Dimensions (2.3 inch base)

Provides drilling and installation dimensions for wall units with 2.3 inch base.

Lighting Plan (No Remote)

LED Lighting Safety and Load

Caution on transformer load and connecting LED lights to safety transformers.

LED Component Overview

Details on distributors, luminaires, and extensions for LED lighting.

Lighting Test

Instruction to test lighting and check plug connections.

Lighting Plan (with FKS4)

LED Lighting Safety and Load (FKS4)

Caution on transformer load and connecting LED lights to safety transformers.

FKS4 System Components

Details on LED components, FKS4 storage, and distributors.

Lighting Test (FKS4)

Instruction to test lighting and check plug connections for FKS4 system.