First use
Open the package
1. Take out products and accessories.
2. Keep packing cases and foam well.
You need to repackage the product if you need to return it.
3. Remove the accessories from the product.
4. Carefully remove all packaging from the product and carefully check the product,
especially the heating tube and power cord.
Setting up
Before starting, make sure there is no strong source of heat nearby.
Avoid using the product in areas where heat is concentrated and where no heat is
allowed.
The bottom should not be occluded.
For the first time, smoke and odor are generated on the surface of the product.
Please install the accessories in the ventilated environment first, and start baking for 10
minutes without food.
Cannot be placed in the closet and corner of the use, use with carpet and tablecloth and
other flammable goods keep a distance.
Place the product on a smooth and heat resistant surface.
Cleaning
Dust on the surface of the product or residues from the packaging and production process
should be cleaned prior to first use.
Then turn the machine on to bake the product and clean it again.
1. Clean all accessories with warm water and let dry. Note that corrosive cleaners may cause
stainless steel clothing.
2. Clean the surface and interior of the product with a small amount of water and a flexible
cleaner.
3. Completely dry the product. Plug in the power cord.
Install grill and pan
Daily simple cleaning can remove the grill. When installing the grill, be careful not to touch
the heating tube to avoid product damage. Make sure the grill is installed in the correct
position and you are ready to install. Grills and nets are necessary when used. Remove the
grill only when t
he product is fully cooled .
When removing the grill, lift the grill gently and remove. Please pay attention to safety when
in contact with the product. When barbecuing meat products, gravy often spills. But you
need to make sure that the gravy doesn't get into the product. Therefore, oil pan must be
To Next Page
Loading...
