GYMBOSS miniMAX User Manual

www.gymboss.com
Thank you for purchasing a GYMBOSS miniMAX.
***Remove protective screen from front of timer.
TURN ON | Push any button.
TURN OFF | Interval timer will turn off after no use for 5 minutes, or you may select off
from the menu.
If left in stopwatch and clock mode timer will not turn off on its own.
BUTTON CONFIGURATION
Battery:
 No Used Batteries Please! We recommend a high quality Energizer or Duracell.
 When your battery gets low a battery icon will flash on the screen.
REBOOT a frozen or malfunctioning timer by placing a NEW battery in timer, then using a
pen, push the REBOOT button. (See in-depth Troubleshooting and Replacement
Procedure document also available here on our website)
There are 3 modes to the GYMBOSS miniMAX.
 CLOCK
 STOPWATCH
 INTERVAL TIMER – the interval timer has 4 separate sections, depending on how
many intervals you wish to time.
1. 1 Interval
2. 2 Intervals
3. 3+ intervals (3 to 25 different intervals in sequence).
4. Multi (2 to 25 different intervals and allows repeating of each interval or
groups of intervals within the 25 intervals. See setup below).
There are 2 menus, the menu allows you to select desired mode, the Setup Menu
allows you to create, save, or recall programs as well as return to the Menu to select
a different mode

GYMBOSS miniMAX Specifications

General

Max Timer Duration	99 minutes 59 seconds
Interval Range	1 second to 99 minutes 59 seconds
Beep Volume	Adjustable
Warranty	1 year
Battery	CR2032
Timer Modes	Interval
Alarm Type	Beep
Countdown Range	1 second to 99 minutes 59 seconds

Summary

Button Configuration and Battery

Battery Information

Details on battery type recommendations and low battery indicator.

Menu and Mode Navigation

Menu Overview

Explanation of the main menu and setup menu options.

Mode Identification

Visual comparison of how different timer modes appear on the display.

Interval Timer Setup

Basic Interval Setup

Guide for setting up 1, 2, and 3+ interval timer configurations.

Interval Timing Configuration

Details on setting interval times, rounds, and alarm types.

Program Management

Saving Programs

Instructions for saving current timer settings to memory.

Recalling Programs

Steps to load previously saved timer programs.

Viewing Program Details

How to view saved interval data in specific modes.

Expanded Mode Operations

Multi Interval Setup

Advanced configuration for multi-interval sequences and repeats.

Stopwatch Operation

Guide to using the stopwatch, including start/stop and reset.

Clock Setup

Instructions for setting and viewing the device's clock.

Belt-Clip Removal