GYMFORM Vibro Max - Constructing the Gymform Vibro Max; Equipment List

Constructing the Gymform® Vibro Max
Before starting please lay out all of the parts listed below. Additional to the components below you will also
need some cello tape.
Equipment List
- Tools:
- Equipment
Tool A
Tool B
No 1 = 1 x main unit No 2 = 1 x wire No 3 = 1 x Main Suport Tube
No 4 = 4 x Screws No 5 = 4 x Washers
No 8 = 4 x washers No 9 = 4 x BMI suport bars
No 10 = 2 x big screws
No 6 = 2 x Bottom suport bars No 7 = 4 x screws
No 11 = 4 x small screws
No 12 = 1 x control panel No 13 = 3 x control panel screws
No 14 = 1 x plug.