H3C WX1804H - Configuring the H3 C Oasis Server; Configuring the Local Device

3
WX5540E EWP-WX5540E
WX5500H series
WX5540H
WX5560H
WX5580H
EWP-WX5540H
EWP-WX5560H
EWP-WX5580H
Yes
Access controller
modules
LSUM1WCME0
EWPXM1WCME0
LSQM1WCMX20
LSUM1WCMX20RT
LSQM1WCMX40
LSUM1WCMX40RT
EWPXM2WCMD0F
EWPXM1MAC0F
LSUM1WCME0
EWPXM1WCME0
LSQM1WCMX20
LSUM1WCMX20RT
LSQM1WCMX40
LSUM1WCMX40RT
EWPXM2WCMD0F
EWPXM1MAC0F
Yes
Hardware series Model Product code
Cloud connection
compatibility
WX1800H series
WX1804H
WX1810H
WX1820H
WX1840H
EWP-WX1804H-PWR
EWP-WX1810H-PWR
EWP-WX1820H
EWP-WX1840H-GL
No
WX3800H series
WX3820H
WX3840H
EWP-WX3820H-GL
EWP-WX3840H-GL
No
WX5800H series WX5860H EWP-WX5860H-GL No
Configuring the H3C Oasis server
For a successful cloud connection establishment, add the serial number of the device to be managed
to the H3C Oasis server. For more information about the H3C Oasis server settings, see the
installation guide for the H3C Oasis server.
Configuring the local device
About this task
You can specify a domain name for the H3C Oasis server and log in to the server through the domain
name on a remote PC to manage the local device.
If the local device does not receive a response from the H3C Oasis server within three keepalive
intervals, the device sends a registration request to re-establish the cloud connection.
To prevent NAT entry aging, the local device sends ping packets to the H3C Oasis server
periodically.
Restrictions and guidelines
Reduce the ping interval value if the network condition is poor or the NAT entry aging time is short.
Procedure
1. Enter system view.
system-view
2. Configure the domain name of the H3C Oasis server.