To Next PageTo Next Page
Need help?Do you have a question about the Haag-Streit BI 900 and is the answer not in the manual?
General| Brand | Haag-Streit |
|---|---|
| Model | BI 900 |
| Category | Microscope |
| Language | English |
Notes on the use of the point as a decimal separator.
Specifies temperature, air pressure, and humidity for transport, storage, and use.
Procedures for receiving, inspecting, and unpacking the device.
Critical safety instructions for device installation and modification.
Guidelines for safe operation, potential hazards, and environmental considerations.
Information on potential eye damage from light exposure and recommended limits.
Notes on device cleaning and disinfection requirements.
Details regarding product warranty, limitations, and manufacturer liability.
Procedure for reporting serious incidents to authorities and manufacturer.
Explains various symbols used throughout the manual for safety and operation.
Overview of the slit lamp's components and their arrangement.
Defines the device's role in diagnosing and monitoring eye conditions.
Explains the focal illumination principle and optical sectioning method.
Describes the advantages of using the slit lamp for eye examinations.
General introduction to the slit lamp's components and capabilities.
Details on the LED illumination system and its components.
Specific information on the LI02 Plus LED illumination unit.
Instructions for applying the label for automatic left/right detection.
Steps for attaching and positioning the camera.
Diagram and instructions for connecting the RM02 module.
Guidance on setting up the microscope and illumination components.
Detailed sequential instructions for connecting cables and modules.
Procedure for powering up the slit lamp and checking status LEDs.
Instructions for adjusting eyepieces for examiner's vision.
Information on observed object sections in the eyepiece and camera.
Procedure to calibrate color tones for optimal image quality.
Details on using the EyeSuite software and interpreting error messages.
Guidelines for patient positioning and hygiene before examination.
Core operational steps including patient setup, illumination, and magnification.
How to adjust filters, apertures, and slit length for different examinations.
Usage of the fixation star for patient guidance during examinations.
Details on microscope components, objective lenses, and eyepieces.
Information on how the device manages light source output at high temperatures.
Explains the status indicators on the illumination head.
Details the status indicators for the power supply unit.
Explains the status indicators on the RM02 release module.
Describes the status indicators for the camera module.
Lists error codes for the illumination head and their corresponding measures.
Lists error codes for the RM02 module and operational LED status.
Lists error codes for the camera and its operational LED status.
Technical specifications for the slit illumination system.
Details on the device's power supply unit and electrical requirements.
Technical specifications for the stereo microscope component.
Specifications for the slit lamp's instrument base and controls.
Physical dimensions and weight of the device and its packaging.
Technical specifications for the camera, including sensor type and frame rate.
Recommended hardware and software specifications for PC compatibility.
Steps for performing regular checks on the slit lamp.
Recommendations for professional servicing and protection when not in use.
Procedures and approved agents for cleaning and disinfecting the device.
Instructions for accessing and replacing the illumination mirror.
Recommendation for using a dust cover to protect the slit lamp.
List of available accessories, parts, and consumables with reference numbers.
Information on compliance with relevant medical device standards and regulations.
Details on the device's classification according to EN 60601-1 and FDA standards.
Guidelines for the correct disposal of electrical and electronic waste.
Lists the standards that the device adheres to.
General information on the device's electromagnetic compatibility, including emitted interference and immunity.
Details on RF emissions and harmonic emissions compliance.
Immunity test levels for ESD, transients, surge, voltage variations, and magnetic fields.
Immunity test levels for conducted RF, radiated RF, and proximity fields.
Guidance on maintaining safe distances from RF communication equipment.
