EasyManua.ls Logo

Haag-Streit Slit lamp BD 900 User Manual

Haag-Streit Slit lamp BD 900
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
© Haag-Streit AG, CH-3098 Koeniz, Switzerland1500.7200631.04040
BD 900
®
Spaltlampe
Lampe à fente
Slit lamp
Gebrauchsanweisung
Mode d'emploi
Instruction manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Haag-Streit Slit lamp BD 900 and is the answer not in the manual?

Haag-Streit Slit lamp BD 900 Specifications

General IconGeneral
Slit Rotation0° to 180°
Base TypeTable mount
TypeSlit Lamp
Magnification10x
IlluminationLED
Slit Width0 to 14 mm
Slit Length/Height1 to 14 mm
Filtersgreen
Working Distance100 mm

Summary

Introduction

Purpose of use

Explains the intended application of the Slit Lamp BD 900.

Summary operating instructions

1 Overview

1.1 Headrest

Details about the headrest component.

1.2 Slit lamp BD 900®

General description of the slit lamp model.

2 Safety

Ambient conditions

Specifies environmental conditions for transport, storage, and use.

Installation

Guidelines for installing the instrument.

Operation and surrounding

Instructions and precautions for operating the equipment.

Changing the light bulbs

Steps for replacing the light bulb.

Electrical

Requirements for electrical connections and cables.

Cleaning

Procedures for cleaning the slit lamp housing and optics.

Light toxicity

Warnings about potential retinal damage from light exposure.

Warranty / product liability

Statutory requirements

Environment

3 Description of equipment

3.1 Illumination unit

Details the slit lamp's illumination system.

3.2 Stereomicroscope

Describes the stereomicroscope component of the slit lamp.

3.3 Accessories for standard model BD 900®

3.4 Power supply

Possible fault causes

Lists potential issues and their causes.

To change the primary voltage fuse

Instructions for replacing the primary fuse.

To change the secondary voltage fuse

Instructions for replacing the secondary fuse.

3.5 Adjustable focusing target

3.6 Video equipment (optional)

Dimension of object area

Table showing field sizes for different magnifications.

Video connection components

Lists components of the video equipment.

Haag-Streit recommendations for video

Haag-Streit recommendations for additional video equipment.

4 Operating the equipment

General notes and recommendations

General notes and recommendations for operation.

Illumination unit adjustments

Instructions for adjusting slit width, length, and position.

4.2 Adjusting the eye-pieces and eyeguards

Eye-pieces Adjustment

Instructions for adjusting the eyepieces for clear vision.

Eyeguard Adjustment

How to adjust the eyeguard for proper working distance.

4.3 Brightness Regulation

Video Brightness Regulation

How to adjust brightness for video background illumination.

4.4 Video Focusing

Appendix A Installation of the equipment

A.1 Attaching headrest and power supply to HSM-801/HSM-901

Steps to connect headrest and power supply to specific instrument tables.

A.2 Attaching headrest and power supply to other manufacturers' tables/units

Steps to connect headrest and power supply to non-Haag-Streit tables.

A.3 Installation of background illumination

b) Diffusor Installation

How to install and use the diffusor for better results.

c) Optical light lead Installation

Installing the optical light lead for video imaging.

d) Background illumination EcoLite EL 02

Mounting EcoLite EL 02

Steps for mounting the EcoLite EL 02 background illumination.

A.4 Installation of camera cables

A.5 Installation of video camera with C-mount interface

Image position on the monitor

How to orient the camera for correct image display.

Image focus on the monitor

How to achieve optimal image focus automatically.

Breath shield

Installing the breath shield for camera models.

A.6 Handling the slit lamp with video equipment

A.7 Installation of video camera with Lipstick interface

Image position on the monitor

How to orient the camera for correct image display.

Image focus on the monitor

How to achieve optimal image focus automatically.

A.8 Mounting of headrest and power supply

Appendix B Equipment maintenance routines

B.1 Replacement of the halogen bulb

Step-by-step guide to replacing the halogen bulb.

B.2 Replacement of the mirror

B.3 Cleaning of the gliding plate and rails

B.4 Cleaning of optical parts

B.5 Cleaning of the axle

B.6 Plastic dust cover

Appendix C Technical specifications

Slit illumination specifications

Technical details of the slit illumination system.

Filter specifications

Information about the integrated filters.

Light source details

Details about the halogen light source.

Illumination intensity levels

Specifies illumination levels at different settings.

Irradiance by wavelength

Data on irradiance based on light wavelength.

Max irradiance values

Irradiance values at maximum intensity and aperture.

Photochemical radiance information

Information on photochemical radiance and potential hazards.

Stereo-microscope specifications

Stereo angle

Specifies the stereo angle of the microscope.

Magnification changer

Details the magnification adjustment mechanism.

Magnification options

Lists magnification options with different eyepieces.

Eye-piece adjustment range

Diopter adjustment range for eyepieces.

Inter pupillary distance range

Specifies the range for interpupillary distance adjustment.

Video camera interface

Type of video camera connection.

Instrument base specifications

Instrument base operation

Description of the instrument base operation.

Instrument base adjustment dimensions

Dimensions for adjusting the instrument base.

Instrument base electric supply

Electrical supply specifications for the instrument base.

Classification details

Electrical shock protection

Electrical shock protection class.

Water protection rating

Water protection rating (IPX0).

Sterilisation and disinfection guidelines

Guidelines for sterilisation and disinfection.

Operation mode description

Specifies the operating mode (continuous).

Power supply specifications

Power supply input

Input voltage and current specifications.

Power supply output 1

Output specifications for power supply.

Power supply output 2

Second output specifications for power supply.

Power supply classification

Classification details for the power supply.

Miscellaneous

Weight

Specifies the weight of the instrument.

Related product manuals