Haas Automation ST - User Manual

ST, DS - Alignment Correction - Introduction
Correct lathe alignment makes a common centerline through the spindle [1], the turret pocket [2], and the tailstock [3] or
secondary spindle. If the turret crashes, the lathe can lose its alignment. This procedure tells you how to correct the lathe
alignment. For clarity, the illustrations hide surrounding components.
Prerequisites
Make sure the machine is level. Refer to the Lathe Leveling Video.
Haas Technical Documentation
ST, DS - Alignment Correction
Scan code to get
the latest version
of this document
Translation
Available
Applies to machines built from:
June, 2010
Copyright 2018 by Haas Automation, Inc. No unauthorized reproduction | Last Published On November 05, 2015 1/67

Summary

ST, DS - Alignment Correction

ST, DS - Alignment Correction - Introduction

Details the procedure to correct lathe alignment, ensuring a common centerline through spindle, turret pocket, and tailstock.

ST, DS - Spindle Centerline to Z Axis Parallelism Correction

ST, DS - Y Axis Square to Z Axis Correction

ST, DS - X Axis to Z Axis Squareness Correction

ST, DS - Turret to X Axis Parallelism Correction

ST, DS - Toolholders to the Spindle Centerline - Correction

Haas Automation ST Specifications

General

Brand	Haas Automation
Model	ST
Category	Industrial Equipment
Language	English