LAST UPDATED: 09/19/2018
Servo Amplifier - Troubleshooting Guide
Introduction
There are four versions of Haas amplifiers. 30A [1],
45A [2], 60A [3], and 90A [4]. All four operate the
same way.
Smart Amplifier assemblies are powered from the
320 VDC Bus from the Vector Drive assembly or
Minimill Power Supply. They each have a red LED
FAULT light, and a green LED POWER ON light to
show the status of the amplifier.
Servo Amplifier - Troubleshooting Guide
Page 1 of 8 pages
To Next Page
Need help?
General
