Habitat Venice 450/9071 - User Manual

MADE IN
BRITAIN
Dimensions
If you need help or have damaged or missing parts, please visit www.argos-support.co.uk
or email: Help@ClickSpares.co.uk (quoting your original order number)
Alternatively, call the Spares Helpline on: 0370 112 1928.
For any other queries please contact the Customer Helpline on: 0345 640 2020
Important - Please read these instructions fully before starting assembly
Venice - Large Corner TV Unit
Assembly Instructions - Please keep for future reference
ALR3254
450/9071
459/9641
Width - 119.8cm
Depth - 39.19cm
Height - 51.2cm
Issue 1 - 13/10/15

Summary

Safety and Care Advice

General Safety Precautions

Includes warnings about unit weight, lifting, children, space, surface, and tool usage.

Care and Maintenance

Guidance on cleaning with damp cloth, mild detergent, and checking for loose screws.

Tools Required

Lists necessary tools for assembly: ruler, screwdrivers, scissors, hammer, eye protection.

Components - Panels

Components - Fittings

Assembly Instructions

Prepare Drawer Fronts and Sides

Prepare drawer fronts (8, 9) with dowels (A) and drawer sides (10, 11) with locking nuts (B).

Attach Drawer Sides to Fronts

Connect drawer sides (10, 11) to drawer fronts (8, 9) using small locking nuts (B).

Fit Drawer Base and Back

Install drawer base (13) into sides (10, 11) and fronts (8, 9). Fit drawer back (12) using knock-in pegs (F).

Attach Handles and Wedgefixes

Attach handles (O) to drawer fronts (8, 9) with screws (L). Fit wedgefixes (I) to drawer assemblies.

Prepare and Fit Top Divider

Prepare top (2) with dowels (A, E). Prepare top divider (4) with nuts (C) and dowels (H). Fit divider to top.

Prepare and Fit Horizontals

Prepare horizontals (3) with locking nuts (C). Attach horizontal (3) to divider (4) with screws (K).

Fit Wooden Dowels

Tap wooden dowels (G) through horizontal (3) into top divider (4) until they 'bottom out'.

Prepare Right Side Panel

Attach runners (P) and screws (M) to side (1). Screw dowels (A) and insert locking nuts (D) into side (1).

Fit Right Side Panel

Connect right side (1) to top (2) and horizontal (3) using dowels (E) and locking nuts (D, C).

Prepare Lower Divider

Attach runners (P) and screws (M) to lower divider (5). Tap wooden dowels (H) into divider (5).

Fit Lower Divider

Push lower divider (5) onto the horizontal (3).

Fit Second Horizontal

Attach horizontal (3) to side (1) and lower divider (5) using screws (K) and locking nuts (C).

Prepare and Fit Plinth

Prepare plinth (7) with locking nuts (C) and dowels (H). Fit plinth (7) to side (1).

Prepare Left Side Panel

Attach runners (P) and screws (M) to side (1). Screw dowels (A) and insert locking nuts (D) into side (1).

Fit Left Side Panel

Connect left side (1) to assembly. Tighten locking nuts (D, C) on horizontals (3) and plinth (7).

Prepare and Fit Back Panel

Prepare back (6) with locking nuts (C). Fit back (6) onto top (2) and tighten nuts (C).

Secure Back Panel

Secure back panel (6) to horizontals (3) using four screws (J).

Fit Drawers

Slide drawer runners (P) into the unit. Secure drawers (10, 11) to runners with screws (N).

Habitat Venice 450/9071 Specifications