Habitat BAMBOO - User Manual

Need help?

Do you have a question about the Habitat BAMBOO and is the answer not in the manual?

Summary

Safety and Care Advice

Product Details

Details of the Bamboo Corner Dining Set - Double Armrest Sofa.

Care and Maintenance

Instructions on cleaning and maintaining the sofa using specific methods.

Additional Guidance

Important assembly tips, age, and weight restrictions for the sofa.

Fittings

Bag 1 Fittings

Contents of fitting bag 1, including screws, washers, and allen key.

Parts

Component List

List and images of all individual parts required for sofa assembly.

Assembly Instructions

Step 1: Attaching Legs and Frame

First assembly step involving attaching legs and frame components using specific fittings.

Step 2: Adding Cushions

Second assembly step, placing seat and back cushions onto the assembled sofa frame.

Step 3: Final Checks and Completion

Final assembly step, connecting sections and completing the sofa, with a safety check reminder.

This document provides assembly instructions and safety guidelines for the Bamboo Corner Dining Set - Double Armrest Sofa, product number 1975165. This product is designed for domestic use and is not intended for commercial purposes.

Function Description:

The Bamboo Corner Dining Set is a piece of outdoor furniture, specifically a double armrest sofa, designed for relaxation and dining in a domestic setting. It features a woven seat and backrest design, supported by metal legs, and includes cushions for enhanced comfort. The corner configuration suggests it is part of a larger dining set, allowing for flexible arrangement in outdoor spaces.

Important Technical Specifications:

Product Name: Bamboo Corner Dining Set - Double Armrest Sofa
Product Number: 1975165
Maximum User Weight: 330kg
Age Recommendation: 18+
Compliance: EN581
Fittings (Bag 1):
- M6x15mm Screw (A) x 4
- M6x35mm Screw (B) x 8
- M6 Washer (C) x 12
- Allenkey (D) x 1
Parts:
- Seat (A1) x 1
- Leg (A2) x 2
- Middle Leg (A3) x 1
- Seat Cushion (A4) x 1
- Back Cushion (A5) x 4
- Plastic foot cap x 5 (assembled on legs)

Usage Features:

Assembly: The assembly process involves attaching the legs and middle leg to the seat using screws and washers, then placing the cushions. It is recommended to assemble the item as close to its final position as possible and on a soft, level surface to prevent damage. Two people are recommended for easier assembly.
Tightening Screws: During initial assembly, all parts and bolts should be loosely assembled. Only once the product is complete should all bolts be fully tightened.
Power Tools: The use of power drill/drivers for inserting screws is not recommended as it could damage the unit. Only hand screwdrivers should be used.
Stability: Regular checks are advised to ensure that all screws and fittings remain tight to prevent the product from becoming loose, which could pose a potential choke hazard.
Placement: The product is designed for domestic use and should be placed in an appropriate outdoor setting.

Maintenance Features:

Cleaning: The product should only be cleaned using a damp cloth and mild detergent. Abrasive cleaners are not recommended. For general cleaning, a dry cloth can be used, but furniture polish is not recommended.
Fastener Checks: Periodically, it is important to check for any loose screws, nuts, or bolts and re-tighten them as necessary to maintain the product's stability and safety.
Disposal: The product should not be discarded with household waste. Instead, it should be taken to a local authority waste disposal centre for responsible disposal. All packaging should also be disposed of carefully and responsibly.

Safety Advice:

Children and Animals: Keep children and animals away from the work area during assembly, as small parts could pose a choking hazard if swallowed.
Work Area: Ensure there is enough space to lay out all parts before beginning assembly.
Loose Fittings: Regularly check that screws and fittings have not become loose, as this could present a potential choke hazard.