Hacker A60 - User Manual

To Next Page

Anleitung / Manual Hacker A60 Brushless Motor

Hacker A60 Brushless - Motor

Montage- und Betriebsanleitung

Vielen Dank für Ihr Interesse an unseren Produkten. Durch kontinuierliche Weiterentwicklung

konnten die A60 Brushless - Motoren in ihrem Wirkungsgrad nochmals verbessert werden. Die A60-

XS und S V4-Serie kann nun die direkt ohne zusätzlichen Motorträger in der Backmountmontage am

Motorspant befestigt werden.

Thank you for being interested in our products. Due continuous research efficiency of the A60

brushless motors could be improved again. The A60 XS and S series have improved for direct

backmount fit. No need for an additional aluminium motor mount.

Lesen Sie bitte vor der Inbetriebnahme die Anleitung sorgfältig durchlesen.

Please read this instruction manual carefully before starting operation.

Main Page

Need help?

Do you have a question about the Hacker A60 and is the answer not in the manual?

Hacker A60 Specifications

General

Brand	Hacker
Model	A60
Category	Engine
Language	English

Summary

Safety Precautions

General Safety Warnings

Motor is not a toy; beware of rotating prop and keep distance.

Operational Guidelines

Fly on official fields, perform range tests, check functions and batteries.

Insurance and Responsibility

Ensure adequate third-party insurance and personal responsibility for maintenance.

Technical Limits and Precautions

Adhere to max speed limit and exercise caution when connecting power.

Prohibited Usage

Do not use if damage is possible or in man-carrying vehicles.

General Notes

Brushless Motor Commutation

Brushless motors require commutation via speed controllers like MASTER/X-series.

Controller Compatibility

Not compatible with conventional brushed motor controllers or direct power sources.

Technical Data

Mounting and Operation

Mounting Options

Supports front-mount (with adapter) and back-mount installation.

Maximum Screw Depth

Maximum screw penetration into the motor case is 5 mm to avoid damage.

Heat Management

Avoid overheating; motors are rated up to 65°C housing temperature.

Cooling and Load

Ensure effective cooling; do not run motor without adequate load or in free run.