Need help?Do you have a question about the Hadcock GH 228 and is the answer not in the manual?
General| Brand | Hadcock |
|---|---|
| Model | GH 228 |
| Category | Accessories |
| Language | English |
Details key physical and dimensional parameters of the tonearm, including mounting, length, height, and mass.
Lists all items included in the tonearm package, such as arm tube, weights, mounting hardware, and tools.
Instructions for positioning the arm base using a template, drilling the mounting hole, and securing the assembly.
Guidance on fitting the pulley wheel arm and spacer to the pivot pillar as detailed in Fig. 2.
Steps for removing the headshell, attaching the cartridge, and selecting appropriate screws.
Procedure for attaching the headshell to the arm tube and connecting cartridge tags to pins.
Instructions on correctly positioning the main weight and rider weight on the weight support.
Process for mounting the complete arm assembly onto the base, ensuring correct wire orientation.
How to align the headshell using a protractor for optimal stylus placement at points A and B.
Adjusting the arm tube's vertical tracking angle (VTA) for parallelism with the turntable platter.
Procedure for setting the arm rest to ensure adequate clearance for the stylus on the record.
Setting the bias thread loop and determining tracking force, recommending a stylus balance gauge.
To Next Page