Need help?Do you have a question about the Hafco Metalmaster GHD-38A and is the answer not in the manual?
General| Drilling Capacity | 38mm |
|---|---|
| Spindle Taper | MT4 |
| Spindle Travel | 150mm |
| Speeds | 12 |
| Voltage | 240V |
| Weight | 280kg |
| Motor Power | 1.5kW |
Instructions for filling the machine with oil according to level indicators.
Daily lubrication for the quill and spindle.
Lubrication of the quill gearing shaft.
Cleaning and lubrication of the quill rack.
Cleaning and greasing of the column every 50 hours.
Filling and changing oil in the speed box.
Filling and changing oil in the feed box.
Cleaning and lubrication of the rack.
Daily lubrication of table points.
To Next Page