Need help?Do you have a question about the Hafco AL-320G and is the answer not in the manual?
Essential safety guidelines for operating machinery, covering personal protection and workspace.
Provides a visual identification of the key parts and features of the metal lathe.
Details the primary applications, capabilities, and benefits of the metal lathe.
Lists detailed technical data, dimensions, and performance parameters of the metal lathe.
Explains power transmission from motor to spindle and speed selection.
Covers auto feed mechanisms, longitudinal, cross feed, and threading operations.
Describes methods for adjusting the cutting tool height to match the spindle centerline.
Provides guidance on safely lifting, moving, and securing the lathe during setup.
Covers adjustments for main spindle bearings and slide clearances for optimal accuracy.
Illustrates and lists the various controls and parts used during lathe operation.
Details how to change the main spindle speed using headstock controls and pulley settings.
Refers to section D.2.2 for detailed threading procedures and charts.
Identifies all lubrication points on the machine and provides a schedule for maintenance.
Presents the electrical wiring diagram for the lathe, including color codes and cautions.
Lists all spare parts for the lathe's bed assembly.
Lists all spare parts for the lathe's headstock assembly.
Lists all spare parts for the lathe's gearbox assembly.
Specific safety instructions for operating metal lathes to prevent injury and accidents.
Outlines the program for hazard identification, assessment, and control for machinery.
To Next Page
General