Need help?Do you have a question about the Hafco BP-255 and is the answer not in the manual?
General| Maximum Blade Diameter | 255 mm |
|---|---|
| Blade Arbor | 30 mm |
| Motor Power | 1.5kW |
| Voltage | 240 V |
| No-load Speed | 4000 RPM |
| Max Cutting Height at 90° | 80 mm |
| Max Cutting Height at 45° | 55 mm |
| Weight | 35 kg |
General safety precautions and requirements for operating machinery safely.
Specific safety advice and hazards related to band saw operation.
Guidance on choosing a suitable location and environment for the machine.
Instructions and requirements for connecting the machine to the power supply.
Steps for safely removing the machine and its components from the shipping carton.
Step-by-step instructions for assembling the machine's stand, table, and guide rail.
Procedure for testing the machine after assembly to ensure it operates correctly.
Instructions on how to adjust and secure the tilting angle of the machine's table.
Procedure for aligning the saw blade to run centrally on the wheel tyres.
Steps for correctly setting the blade tension for safe and accurate cutting.
Guidance on adjusting support bearings for optimal blade support during cuts.
Instructions for adjusting blade guides to provide side-to-side support.
Overview of the main controls and their functions on the band saw.
Details on blade characteristics, types, and selection for different cuts.
Step-by-step instructions for safely removing and installing a new saw blade.
Common problems, their possible causes, and solutions for the band saw.
Procedure for aligning the band saw wheels to ensure optimal performance and tyre life.
To Next Page
