Hafco BS-7DS User Manual

INSTRUCTION MANUAL
BS-7DS
Swivel Head Metal Cutting Band Saw (240V)
215 x 178mm (W x H) Rectangle
B008A
Page 1
Instructions Manual for BS-7DS (B008A)
29/02/2016

Hafco BS-7DS Specifications

General

Brand	Hafco
Model	BS-7DS
Category	Saw
Language	English

Summary

PLANT SAFETY PROGRAMME

NEW MACHINERY HAZARD IDENTIFICATION, ASSESSMENT & CONTROL

Assesses and controls hazards for new machinery.

1. WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY

2. SAFETY RULES FOR ALL TOOLS

A. USER SAFETY RULES

Rules for personal safety while operating the machine.

B. MACHINE OPERATION SAFETY

Guidelines for safe machine usage and operation.

E. MAINTENANCE INSTRUCTIONS

4. TRANSPORTATION OF MACHINE

5. INSTALLATION AND SETUP GUIDE

Guidance on installing and setting up the machine.

7. PROPER TOOTH SELECTION

8. BI-METAL SPEEDS AND FEEDS

9. ASSEMBLY INSTRUCTIONS

10. OPERATION

A. WORK SETUP PROCEDURE

C. BLADE SPEED SETTINGS

BLADE SELECTION AND CHANGING

Guidelines for choosing and replacing the saw blade.

BLADE GUIDE AND SWIVEL ADJUSTMENT

SWIVEL CUTTING OPERATION

BLADE GUIDE BEARING ADJUSTMENT

Critical adjustment for blade performance.

BLADE TRACK ADJUSTMENT

MAINTENANCE SCHEDULE

SCHEDULED MAINTENANCE TASKS

LUBRICATION AND TROUBLESHOOTING

LUBRICATION GUIDE

Recommended lubrication points and types.

BLADE BREAKAGE AND DULLING

Causes and solutions for blade issues.

TROUBLESHOOTING COMMON ISSUES

BLADE WEAR, TEETH RIPPLING, MOTOR HEAT

CUT QUALITY PROBLEMS

WIRING DIAGRAM

CIRCUIT DIAGRAM