Need help?Do you have a question about the Hafco PD-26 and is the answer not in the manual?
Read manual and labels, learn application, limitations, and hazards.
Use 3-conductor cord and 3-prong plug. Never connect green wire to live terminal.
Wear proper apparel, safety goggles, and keep work area clean and children away.
Separate loose parts, check against table, ensure all items are accounted for.
Remove protective oil from table and column using household grease and spot remover.
Apply paste wax to table and column to prevent rust. Wipe all parts clean.
Lock the head to the column. Always have them locked in place while operating.
Holds drill bit or other recommended accessory to perform desired operations.
Has locking feature to prevent unauthorized use by children.
Ball bearings are factory packed. Lubricate gear, rack, elevation mechanism, and spindle splines.
Diagrams for 1-phase and 3-phase power connections are provided.
To Next Page
General
