Need help?Do you have a question about the HAI OMNI LT and is the answer not in the manual?
General| Brand | HAI |
|---|---|
| Model | OMNI LT |
| Category | Home Automation |
| Language | English |
Details UL listing for the OmniLT controller and its applications.
Explains the basic functions and components of the OmniLT console.
Step-by-step instructions on how to disarm the system and silence alarms.
Explains how to arm the system in Day, Night, and Away modes.
Describes using shortcut keys and quick arm features for faster system arming.
Details system actions during arming and the Exit Error sequence.
Covers bypassing, auto-bypassing, and restoring security zones.
Explains Fire, Gas, and Emergency key activations and their responses.
Lists and explains common system trouble indicators.
Introduces user codes, levels of authority, and specific code types.
Guides on controlling individual and room-based lighting loads.
Details setting up and executing Leviton scenes and commands.
Introduces temperature control features for HVAC systems.
Explains PESMs for energy saving and temperature management.
Runs diagnostic tests on system components.
Explains the system's built-in telephone response feature.
Details how to access the system using phones within the house.
Explains how to control the system remotely over the phone.
Introduces the digital and voice dialer components for alarms.
Details how the voice dialer works and what it does during an alarm.
Explains the purpose of the Setup menu and initial code entry.
Details setting up, assigning authority, and managing user codes.
Setting the system's current time, date, and daylight savings.
Introduces programming automated control and security functions.
Covers adding, viewing, deleting, and editing automation programs.
Details setting up programs triggered by buttons or events.
Explains the menu for configuring all telephone-related settings.
Enabling/disabling remote access and setting call answering behavior.
Setting primary phone numbers for alarms and contact.
Setting the sequence for alarm call dialing.
Configuring entry/exit delays and exit time restart.
Setting up enhanced security access requirements.
Selecting and configuring audio zones and sources.
Lists mandatory settings and features for UL compliance.
To Next Page
