How to fix Haicom GPS when no position output but timer is counting?
If your Haicom GPS unit shows no position output, but the timer is counting, it's likely due to a weak or non-existent GPS signal. Try moving the HI-203E to an open space and then press the 'Reset' button.
Why Haicom GPS can't find signal in outdoor space?
If your Haicom HI-203E GPS can't find a signal, even in an outdoor space, it might be blocked by a building or your car's roof. Try moving to a completely open outdoor area and press 'Reset'. Alternatively, connect an external antenna to the side of the HI-203E to improve the GPS signal.
What to do if Haicom GPS shows 'Execute Fail' error?
If your Haicom GPS shows an 'Execute Fail' error, it could be due to an incorrect CPU type. PocketPC supports multiple CPU types. Ensure you've downloaded the correct testing or mapping software for your device. You can verify the CPU type using the PDA smart menu's 'setting' function.
What to do if Haicom GPS can not find HI-203E?
If your Haicom HI-203E GPS can't be found, the problem might be a poor connection. Ensure the HI-203E is plugged in firmly.
Why Haicom GPS has no signal indoors?
If your Haicom HI-203E GPS has no signal when used indoors or inside a car, it's likely due to a weak or non-existent GPS signal. Move the HI-203E to an open space or place it on the car roof, then press the Reset button.
To Next Page
General