25
makes abnormal 
sounds. 
• The appliance s not located on level 
ground.
• Adjust the feet to level the 
appliance.
• The appliance touches some 
object around it.
• Remove objects around the 
appliance.
be heard similar to 
that of flowing 
water. 
alarm beep. 
• The fridge storage compartment 
door is open. 
• Close the door or silence the 
alarm manually. 
hum. 
• The anti-condensation system is 
working 
• This prevents condensation 
and is normal 
or cooling system 
does not work. 
• Mains plug is not connected in the 
mains socket.
• Connect the mains plug.
• The power supply is not intact.
• Check the electrical supply to 
the room. Call the local 
• The LED-lamp is out of order.
• Please call the service for 
changing the lamp.
* To contact the technical assistance, visit our website: https://corporate.haier-europe.com/en/ 
Under the section "website", choose the brand of your product and your country. You will be 
redirected to the specific website where you can find the telephone number and form to contact 
the technical assistance. 
Power interruption 
In the event of a power cut, food should remain safely cold for about 12 hours. Follow these tips 
during a prolonged power interruption, especially in summer: 
► Open the door/drawer as few times as possible.
► Do not put additional food into the appliance during a power interruption. 
► If prior notice of a power interruption is given and the interruption duration is longer than 12 hours, 
make some ice and put it in a container in the top of the refrigerator compartment. 
► An inspection of the goods is required immediately after the interruption. 
► As temperature in the refrigerator will rise during a power interruption or other failure, the storage 
period and edible quality of food will be reduced.  Any food that defrosts should be either
consumed, or cooked and refrozen (where suitable) soon afterwards in order to prevent health
risks. 
Memory function during power interruption 
After restoration of power the appliance continues with the settings that were set before the power 
failure.