28
3. The stability can be checked by alternately bumping on the
diagonals.
The slightly swaying should be the same in both
directions.
Otherwise the frame can warp: possible leaking
door seals are the result.
A low tendency to the rear
facilitates the closing of the door.
Fine tuning of the doors
If the doors are not in one l
evel,
this mismatch can be remedied
by following:
Using adjustable foot
Rotate the adjustable foot according to the direction of arrow
to turn up or down the foot
.
Open the upper door and lift it.
Carefully clip the spacer
(enclosed in the accessory bag) in
the white plastic ring of the middle hinge by hand or using
tools like pliers. Do not scratch or bruise the door.
Notice
In the future use of refrigerator, doors uneven phenomenon may occur to the weight of stored food.
Then please adjust according to the above methods.
To Next Page
Loading...
