Buttons function：
MODE：used for select indoor operation mode.
FAN：used for select indoor air flow.
SWING：used for setting indoor swing mode.
HEALTH：used for setting indoor health function.
TEMP + -：used for changing set temperature.
CLOCK：used to adjust time.
+、-：stands for time plus/minus, used to adjust time.
TIMER：used to set timer mode.
RECOVERY：used to switch over air-exchanging mode.
CHECK：auto-diagnostic button.
FILTER：filter-cleaned button.
RESET：reset correct mode button.
Display description：
[MODE] [AUTO]：auto operation mode
[MODE] [FAN ONLY]：air-throwing mode
[MODE] [COOL]：Cooling operation mode
[MODE] [DRY]：Dehumidification mode
[MODE] [HEAT]：Heating operation mode
[MODE] [HEAT] [TES]：In heating mode, auxiliary electric heater is running. Only when the
unit with auxiliary electric heater is in auxiliary electric heating mode, it will display.
[FAN] [AUTO]：auto fan running
>a__WcU[S^ <[c >a`V[e[a`Wc
5. Controller functions
5.1 Wired controller
*
740:A7
+
;=34
50<
@D8<6
A4;>
2:=29
A8;4?
@4A
?42=C4?F
27429
58:A4?
?4@4A
;=34 50<
0BA=
0BA=
50< =<:F
2==:
3?F
740A
A4@
7867
;43
:=D
58E
24<A?0:
=>4?0A8=<
@A0<31F
>?4-740A
345?=@A
58:A4?
740:A7
27429
@D8<6
B<8A <=.
34;0<3
;0<B0:
24<.033.
@F@.033.
?==; A4;>.
@4A A4;>.
A8;4? 2:=29
B>
3=D<
C4<A8:0A8=<
=<
=55
308:F
0BA=
?42=C4?F
<=?;0:
=</=55
Wired controller YR-E12, used for free multi units except for the wall mounted unit and console unit
-32-
To Next Page
Loading...
