Haier AES27 - Using the Lock; Replacing Light Bulb

English
8
Using the Lock (see fig. #7)
• Your refrigerator is equipped with a lock and key (located at the bottom center of the door) for
optional security, should you choose. Simply close the refrigerator door, insert the key and turn. To
open, insert the key and turn in the opposite direction.
Replacing Light Bulb
• To replace burnt-out bulbs, remove the temperature control knob by pulling it out (see fig. # 8a).
Carefully pull the plastic light cover to the left and remove. Unscrew the bulb and replace it with a
new one (use bulbs of 15 watts or less). To replace cover, insert the back slots into the casing
(see fig. # 8b). Align the front and push the control knob back in.
5
fig. #8a
fig. #8b
lock and key
fig. #7