The outlet water temperature
DHW Tank is typically higher than
the temperature indicated on the
display. Hot
water shall not be
water
valve to avoid injury caused
by hot water.
Means for disconnection from the
main supply having a contact
separation in all
poles that provide
full disconnection under overvoltage
category III
conditions must be
incorporated in the fixed wiring in
accordance with
the wiring rules.
If the power cord is damaged,it shall
be replaced by qualified professionals
to avoid hazards.
Install the DHW Tank in strict
accordance with the
installation
specified on chapter of
"Installation introduction".
Maintenance shall be
according to the
instructions
chapter of "Checking
and maintenance"
Safety instructions (to be followed at any time)
English
of a
be pointed at human body
immediately after opening the hot
instruction
carried out
specified on
To Next Page
Loading...
