EasyManua.ls Logo

Haier ES15V-Q1(R) - User Manual

Haier ES15V-Q1(R)
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Model No: ES15V-Q1(R)
Issue
Rev.
No
v
.2014
A

Questions and Answers

  • E
    Erika HopkinsAug 6, 2025
    Why is my Haier Water Heater outflow cold water?
    • M
      Mary WilliamsAug 6, 2025
      If the water flowing from your Haier Water Heater is cold, make sure the hot water valve is fully open. Also, check if the water temperature is correctly adjusted according to the manual's instructions. Insufficient heating time for the set temperature can also cause this, so adjust accordingly. If none of these steps resolve the issue, it could indicate damaged components, and you should contact a maintenance department.
  • W
    William MartinAug 12, 2025
    How to fix temperature lower than setting on Haier Water Heater?
    • G
      Gregg DickersonAug 12, 2025
      If the temperature from your Haier Water Heater is lower than the set value, or the outflow is too hot, ensure the function is correctly set and the temperature isn't set too low, adjusting according to the manual. Also, check if the tap water pressure is too high and, if so, lower the flow rate of the mixing valve.
  • A
    amanda50Aug 18, 2025
    What to do if outflow is not stable in amount and temperature in Haier ES15V-Q1(R) Water Heater?
    • Y
      Yolanda JamesAug 18, 2025
      If the water flow from your Haier Water Heater is unstable in amount and temperature, the issue might be unstable tap water pressure. Try using the heater after adjusting the flow rate of the mixing valve to a lower setting or after the water pressure stabilizes.
  • M
    Mary CarneyAug 25, 2025
    What to do if my Haier ES15V-Q1(R) Water Heater can't be started or the display doesn't work?
    • W
      wendy30Aug 26, 2025
      If your Haier Water Heater isn't starting or the display isn't working, first, check the power socket to ensure the power supply is properly connected. If the problem persists and is beyond a simple power connection issue, it may indicate damaged components, requiring assistance from a qualified maintenance department.
  • M
    Michael CarterAug 31, 2025
    How to troubleshoot no flow from Haier Water Heater?
    • A
      Andrew ShepardAug 31, 2025
      If there is no water flow from your Haier Water Heater, first, check if there is water or sufficient water pressure in the water system. Then, inspect the water-use spot for blockages and ensure the hot water valve is open. Clean any blockages you find.

Summary

General Safety

Safety Alert Symbols and Warnings

Explains hazard symbols like Danger and Warning for potential injury or death.

Electrical Shock Hazard Warnings

Details precautions for electrical shock hazards during servicing and operation.

Product Disposal Guidelines

Provides information on the responsible disposal of the product according to EU regulations.

Product Information

Product Features

Lists key safety, durability, and functional features of the water heater.

Model Identification

Explains the meaning of each digit/character in the model number ES15V-Q1(R).

Product Dimensions

Displays the product and packing dimensions, net and gross weight.

Technical Specifications

Lists rated voltage, frequency, temperature, power, capacity, pressure, and waterproof grade.

Installation Guide

General Installation Requirements

Outlines requirements for wall stability, location, power supply, and ambient temperature.

Installation Method

Details the wall-hung installation process, including drilling and accessory mounting.

Typical Installation Diagram

Illustrates the standard connection of hot/cold water and safety valve.

Servicing Procedures

Remove Outer Shell

Step-by-step instructions on how to safely remove the outer shell for maintenance.

Change Temperature Controller

Guides on removing the knob and replacing the thermostat component.

Replace Heating Assembly

Instructions for changing the heating assembly, emphasizing correct orientation.

Wiring Diagram

Troubleshooting

No Flow Issues

Addresses issues with no water flow or low pressure in the system.

Outflow and Temperature Problems

Covers problems with water outflow, including temperature and stability.

Cold Water Temperature Issues

Discusses problems related to water temperature not matching the setting or outflow being hot water.

Stability and Performance Issues

Addresses issues like unstable outflow amount/temperature and the heater not starting.

Haier ES15V-Q1(R) Specifications

General IconGeneral
ModelES15V-Q1(R)
CategoryWater Heater
BrandHaier
Capacity15 Liters
Voltage220V
Rated Frequency50 Hz
Heating ElementIncoloy 800
Temperature ControlAdjustable Thermostat
Rated Power2000W
MountingWall-mounted
MaterialStainless Steel

Related product manuals