4
Unit will start running to reach the
temp. setting on LCD.
COOL/DRY:
For each press of “
” button, air
displays as follows according to
different operation modes:
FAN Operation
LOW MED HI AUTO
Press FAN SPEED button. For each press, fan speed
changes as follows:
Unit will run at selected fan speed.
Press TEMP button.
Every time the button is
pressed, temp. setting
increases 1 ºC.
Every time the button is
pressed, temp. setting
decreases 1 ºC.
Operation
When humidity is high, condensate water might occur
at air outlet if all vertical louvers are adjusted to left or
right.
position for a long time in COOL or DRY mode,
otherwise, condensate water might occur.
1
2
AM
QUIET
ECO
FAN
SPEED
.
.
1
2
AM
QUIET
ECO
FAN
SPEED
.
HEAT:
SMART:
Initial state
Initial state
For each press of “
” buttor, remote controller
displays as follows:
remote controller:
To Next Page
Loading...
