Haier AS50TDDHRA-CL - User Manual

Other manuals for Haier AS50TDDHRA-CL

Questions and Answers:

R
robert11Aug 9, 2025
Why is my Haier AS50TDDHRA-CL Air Conditioner cooling poorly?
- L
  Latoya SmithAug 10, 2025
  Poor cooling in your Haier Air Conditioner can stem from several factors. Check if the air filter is dirty and clean it, ideally every 15 days. Ensure there are no obstructions blocking the inlet and outlet. Verify that the temperature is set correctly. Also, make sure all doors and windows are closed. During cooling, use curtains to block direct sunlight. Finally, consider if there are too many heat sources or people in the room.
M
Michele RossAug 15, 2025
How to fix Haier AS50TDDHRA-CL that does not restart immediately?
- J
  Jamie SmithAug 16, 2025
  When a Haier Air Conditioner is stopped, it won't restart immediately until 3 minutes have passed to protect the system. Also, when the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes.
D
Dawn DixonAug 21, 2025
Why does my Haier AS50TDDHRA-CL smell?
- C
  Cameron BassAug 21, 2025
  The smells from your Haier Air Conditioner are because the system circulates smells from the interior air. This could include odors from furniture, paint, or cigarettes.
K
Kevin WarnerAug 28, 2025
Why is there noise coming from my Haier AS50TDDHRA-CL?
- B
  Benjamin WilkersonAug 28, 2025
  If you hear a big noise from air flow when your Haier Air Conditioner is operating, the air filter may be too dirty. During operation or when stopping, swishing or gurgling noises may occur because of refrigerant flowing in the system. A cracking noise might be heard during operation as the casing expands or shrinks due to temperature changes.
S
Susan ClaySep 3, 2025
Why can’t I change the fan speed in dry mode on my Haier AS50TDDHRA-CL?
- A
  Adam StevensSep 3, 2025
  When your Haier Air Conditioner is in DRY mode, if the room temperature drops below the set temperature plus 2 degrees Celsius, the unit will run intermittently at LOW speed, regardless of the FAN setting.