?
Tutdoor unit type
{D5A7< C=C9
total indoor capacity.766\/ model.optional/
less than 99; KVL3G99;F
Granch pipe selection@
Sote@
74 \hen connecting the pipe and the
outdoor2 please pay attention to the outdoor
pipe dimension4
84 \hen adjusting the diameter among
pipes and among the units2 please must execute at the branch pipe side4
94 \hen welding with hard solder2 please must blow nitrogen4 Nf not2 a number of oxide will be
produced and cause heavy damage4Gesides2to prevent water and dust into the pipe2 please
make the brim as outer roll4
Hut off pipe with the cutter
Hut off at the middle
Fdhesive side
Urepare on field
Xeal the connection and wrap the
heat insulator with adhesive tape
Nnstallation procedure
To Next Page
Loading...
